Make sure device is plugged in.
Power on.
- Button is located on the back side on the bottom left on top of the outlet plug.
- Please note that the lights come on when the device is plugged in, but device might not actually be on.
To pair a Bluetooth device…
- Press and hold the BT/AUX PAIRING BUTTON (blue button with triangle on it) until the LED flashes quickly.
- Open Bluetooth in your mobile phone, MP3 player or other Bluetooth equipment to pair and connect.
- In your Bluetooth device, you may be asked to enter the PIN code: 0000 (Bluetooth version 2.0 and above will not require a PIN code).
- When the LED lights solid, you can begin playing music from your Bluetooth device.
Adjust the volume
- Make sure the BT/AUX dial above the blue light is turned up
- Make sure the “Main Control” Level located on the far right is also turned up.

READ THE FULL MANUAL HERE.

Power on.
- Green: The receiver is turned on.
- Red: The receiver is in standby mode
Adjust Input Selector (Medium Dial) to PORTABLE for Aux cord connection and BLUETOOTH for Bluetooth.
- BLUETOOTH STR-DH190
Adjust Main Volume (Large Dial) to desired level.
Make sure Speaker A and Speaker B (Speaker button on the left above Power button) are both on.

READ THE FULL MANUAL HERE

Turn on. Note: SoundCore will automatically turn off after 10 minutes if no device is connected.
Pair with your device
- Un-pair connected device and re-enter pairing mode by holding down the Bluetooth Icon.
- Button will rapidly flash blue when in “pairing mode”
- Button will be a steady blue when connected to a device
- Please note: When turned on, SoundCore will automatically connect to the last connected device if available. If not, SoundCore will enter pairing mode.
- Having connection problems? Remove SoundCore from your device’s Bluetooth history, ensure it’s less than 3 feet away then try pairing again.

READ THE FULL MANUAL HERE